English
27
4. Operating instructions
4.3.2 Using the Mixing Pitcher
1. Make sure that the cutting unit (10) is sitting correctly
in the mixing pitcher (7) (Fig. 6) and add the ingredients
to the mixing pitcher (7). Do not fill the mixing pitcher
(7) above the
MAX
-mark.
Note:
The ingredients must be diced into small
pieces of approximately 15 x 15 mm before being
put into the cup.
2. Now put the lid (11) on the mixing pitcher (7) and
make sure that the noses on both sides of the lid (11)
are sitting properly in both recesses in the mixing
pitcher (7) (Fig. 7). Be sure not to tilt the lid (11) and
press it onto the mixing pitcher (7) until it stops.
3. Now connect the motor unit (5) to mixing pitcher lid
(11) and turn it clockwise until so that it clicks into
place (Fig. 8).
4. Proceed as specified in Points 4 – 5 in Chapter
4.3.1
Using the Mixing and drinking cups
.
Be sure to hold the mixing pitcher (7) by the handle
(9) with one hand while holding the motor unit (5)
with the other hand and pressing the On / Off switch
(4).
5. Hold the motor unit (5) and mixing pitcher (7) by the
handle (9) firmly with both hands during operation.
6. You can switch off the device once all ingredients have been pureed and the
smoothie has reached the desired consistency.
Note:
Do not operate this device (chopper) for more than 30 seconds at a time.
Then let the device cool off for at least 2 minutes before operating it again. The
number of operation is 3 cycles.
7. Now turn the motor unit (5) counterclockwise and remove it from the mixing
pitcher (7).
8. Empty the mixing pitcher (7) into a suitable container.
16
2
24
3
32
4
40 oz
5Cups
MAX
Fig. 6
16
2
24
3
32
4
40 oz
5Cups
MAX
Fig. 7
16
2
24
3
32
4
40 oz
5Cups
MAX
Fig. 8
TB13SM-Smoothie Maker_190509.indb 27
9/5/2019 11:56