5
Using the Flatbook to perforate.
1. To perforate remove all blades apart
from the perforator then position on
the edge of your film.
2. This will help you to separate
difficult/specialist films.
Assembling the Flatbook for use with the Matrix Duo®
1. Remove the two screws leaving
the countersunk screw in place.
4. Attach the sliding rod to the
sliding rod support with M6 screw
with washer (x2) using the 5mm allen
key and screws provided.
2. Using the 2.5mm allen key and screws
provided, fit the sliding rod support.
5. Attach the Flatbook unit to the
support arm using the screws located
on the Flatbook unit.
3. Place the sliding rod through the
support block, ensuring that the flat
side is upwards.
6. Fit the end block handle to the
Flatbook unit.
Sliding Rod Support
End black handle
Support Arm
and Support Block
Sliding Rod
Parts Required
M6X20
screws
M4X20
screws
Complete Flatbook
Unit
