OmniFlow 330
4.5 Outfeed conveyor
(
Optional
)
4.5.1 Installation
As shown in the following figures, the extension board should be lower than the
conveyor so that the coming sheets will not hit the board.
4.5.2 Mount the conveyor to the machine
As shown in the following figures, there are two shafts on the machine for the
conveyor. Firstly, hang the conveyor to the shafts. Secondly, fix the supporting bar to
the protecting cover. Finally, check the screws and make sure all the screws are
fastened.
Extension board
①
7