Panic Button Remote
(V-PANIC2-345)
Quick Reference
Programming Instructions
(For more details, go to the Support page at:
Vivint.com
, and the KIM site at:
corp.vivint.com/sites/KIM/
)
•
The PANIC2 device can be programmed as a supervised or non-supervised device. If supervised, the
device should always stay within range of the panel.
•
The device can be programmed to contact emergency services with either an audible or silent alarm.
Installer Test
Press and hold the button for 2 seconds to send signals from the device to the control panel.
Specifications
Wireless Signal Range
300 feet (91.4 m), open air
Battery
Panasonic CR2032 or equivalent lithium battery
Battery Life
3-5 years under normal usage
Transmitter Frequency
345 MHz
Code Outputs
Alarm, Alarm Restore, Supervisory, Low Battery
Supervisory Interval
70 minutes per signal (12 hours for panel to report supervision failure)
Operating Temperature Limits
32° to 120°F (0° to 49°C)
Relative Humidity
5-95% Non-Condensing
PRINT INSTRUCTIONS:
REFERENCE SHEET V-PANIC2-345 P/N 77-000020-001 REV 1.1 |
INK:
BLACK |
MATERIAL:
20 LB MEAD BOND |
SIZE:
5.50" X 8.50" SCALE 1:1 |
FOLDS:
TRI-FOLD VERTICAL, TRI-FOLD HORIZONTAL (TO FIT IN BOX)
The Vivint Panic Button Remote (PANIC2) is designed to transmit an
emergency signal from any location within range of the control panel.
The panel will receive signals whether the system is armed or disarmed.
The PANIC2 device is discrete and versatile. It is small and lightweight
enough to be stored in a pocket or purse. Additionally, the supplied
accessories allow the device to be worn on a lanyard, wristband, or belt
clip/holder; or placed in the holder that can be mounted in a fixed
location (see accessory drawings).
Accessories
Use the supplied accessories to carry or mount the PANIC2 device.
