background image

EN-19

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

. English .

User’s Manual

Projector

Input Menu

This menu allows to specify the signal source that you wish to project. This is particularly
useful if you have several sources (video and/or computer) connected to your projector.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
   menu.
2.Press the   or    button to select
   INPUT menu.
3.To enter the sub-menu setting, press
   the MENU button once again.
4.Press the   or    button to select the
   desired input source.
5.Press the   button to confirm the input selection.
6.To exit from the current menu, toggle the MENU button.

The following table provides detail of the available sub-menu choices:

 Option

Description

 Computer

Signal from computer. (desktop or notebook)

 DVI

Signal from DVI(Digital Visual Interface) device.

 YCbCr

Component video signal.

 S-Video

S-video signal.

 Video

Composite video signal.

 HDTV

Signal from HDTV.

                                              (High Definition TV - a high-resolution TV
                                              standard, which is part of the group of digital
                                              TV standards introduced in USA in late 1998).
 Auto Search

Automatically scans the input source.

Picture Menu

This menu provides precise control of the projected image including:
brightness, contrast, position(vertical & horizontal), tracking, sync, sharpness(computer
signal) and auto tracking.

Summary of Contents for DP-1200 X










































Reviews: