EN-8
○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual
Projector
Remote Control
Button Function
POWER
Turns the projector and lamp On and OFF
MENU
Displays (or hides) the on-screen control menus
LASER
Fires laser pointer (press and hold)
WINDOW
Adjusts Window size while in PIP mode
AUTO
Automatically adjusts frequency and phase
(To adjust manually - press enter, Menu/Computer/Tracking,
Sync, PosiH, PosiV to fine tune.)
COMPUTER
Selects computer input signal (computer, DVI, or HDTV)
VIDEO
Selects video input signal (YCbCr, S-Video, Video)
PIP
Picture-in-Picture: displays a second image window
POINTER
Displays pointer icon on the screen
Confirms the current setting
ESC
Deselects the current setting and exits a menu
KEYSTONE
Adjusts trapezoidal distortion of the projection that may occur
depending on the horizontal projection angle
VOLUME
Adjusts the volume of the projectors speakers
FREEZE
Freezes the current graphics and
video image on the screen
BLANK
Cuts off the screen temporarily
D ZOOM
Digitally zooms the current image window
MUTE
Temporarily cuts-off the projector speakers
LANGUAGE
Selects the desired OSD (On-Screen
Display) language
THUMB PAD
The thumb pad is a thumb-activated
navigational controller. It acts like a small
joystick or game controller. Pressing the pad
forward or backward allows you to
navigate up and down the projector menus.
If your projector is equipped with an optional
mouse link cable, the controller pad will
function as a remote mouse for your PC.
