22
memory.
3. The number of photos that can be taken for each resolution and per the
memory card inserted appears on the top right of the LCD screen.
4. After the shot is taken the number is reduced by one.
5. When the camcorder's internal
memory is full, “Memory Full” will appear on
the LCD screen when you attempt to press the Shutter button to take a photo.
Either download the photos to your computer using the Vivitar Experience
Image Manager software as described below in the section “
Transfer photos
and videos to your computer
” or insert an SD card to continue taking more
photos and videos.
6. The number of photos that can be captured not only depends on the internal
memory or the
SD card’s capacity but also on the resolution selected. Better
quality photos are taken at higher resolutions but these will also take up more
memory on the card.
LED Lamp
When light conditions are poor, press the
LED ON/OFF
button on the middle left of
the LCD Screen.
Two LED white lamp lights will light up (like a torch) to offer better lighting.
To turn off the LED light, press the LED ON/OFF button again.
