9
TURNING ON AND USING THE CAMERA
Press the
POWER
button, located on top of the camcorder, to turn on the camcorder.
RESET
: If the camcorder becomes unresponsive, insert a thin pin into the RESET
hole and gently push the pin until you hear a slight ‘click’ sound. The camcorder will
then reset.
NOTE:
This camera includes a built-in lithium battery. To charge the battery,
connect the camera using the USB cable to the computer’s USB port or to an AC
charger. The charge light will turn off when the battery is fully charged.
/ Switching Modes