16
When the camcorder is first powered ON, the DV (Video) Capture Mode will be active.
The icons that appear on the LCD screen are the best default settings so that you can begin to capture
and enjoy clear quality photos.
To change the active camcorder mode, make sure the camcorder is powered ON.
Press the
DC Mode
button to select the DC (Photo) mode.
Press the
Playback
Button on the inside wall of the DVR to open the Playback mode.
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display
Navigating the Menus
Each camcorder mode has a set of menus specific to that mode.
1) Press the
OK
(
MENU/SET)
button to open the menus for the current mode.
2) Press the
LEFT
or
RIGHT
direction control button to scroll between the various menus for the
current mode.
3) Press the
UP
or
DOWN
direction control button to highlight the desired menu selection.
4) Press the
OK (MENU/SET)
button to confirm and select the highlighted menu option.
5) If the selection can be remembered by the camcorder, a selection icon
will appear to the right of
the selected menu option. Changes made to these options will remain as is until you decide to
change them again at a later time.
6) Some menu options are single-use functions that are not remembered by the camcorder and do
not display this icon when selected.
7) At any time you can press the
OK (MENU/SET)
button to exit the menus and return to the previous
screen.
