11
Note
:
Do
not
shake the camera to throw the water off.
Do
not
open the USB cover until the camera is totally dry.
Turn the camera around in all directions and notice if there are still signs of water before opening
the USB cover.
If you use the camcorder in
sea (salt) water
, please rinse the camcorder with fresh clean water as
soon as you can afterwards. Sea water has a high salt content, as well as small particles of sand
and this may damage the camcorder.
Warning:
If any water enters the USB cover, this will damage the camcorder.
If there is a little water on the edge of the USB cover when the door is opened, dry it carefully with a
soft cloth before opening.
Do
not
let the water get inside the USB port or SD Memory card slot.
Do
not
attempt to open the camcorder casing, tamper or dismantle the camcorder.