6
Initial Camcorder Setup
Installing and Charging the Battery
Installing the Memory Card
Charge before using your camcorder for the
first time. To Charge the Lithium Battery:
1. Make sure the battery is inserted properly
with the correct polarity and the battery
latch properly securing the battery in place.
2. Power off the camcorder.
3. Connect the camcorder using the supplied
USB cable to the computer’s USB port or
to the AC Charger (which is then inserted
into a standard wall socket).
4. Allow the battery to charge for at least 3
hours before using the first time.
5. The charge light will turn off when the
battery is fully charged.
Insert SD Memory card (up to 32GB) before
use.
IMPORTANT:
You must use a Class 4
SD
card or higher SD card only.
