13
2.
The
icon as well as the red LED will begin to flash indicating that the flash is charging.
3.
Press the Up/Flash button again for the
icon to appear on the LCD screen. This means the
flash function has been "forced on" (manual flash).
If the flash is not ready, a red LED will light up and the
icon will flash repeatedly- wait until the
flash is ready before taking a photo.
4.
Press the Up/Flash button until the icon appears again. This will turn off the flash function. This
is the default flash setting.
Note:
This function will not work if your battery power is insufficient.
Self-Timer
You can include yourself in a photo by using this feature to delay the time between your pressing the Shutter
button and when the photo is actually taken. It is recommended that you use a tripod when you use the
self-timer function.
1.
Press the Menu button.
2.
Press the Up/Down button repeatedly to select the self-timer
icon on the LCD.
3.
Press the Shutter/OK button again within 5 seconds. The timer runs and the LED flashes for 10 seconds
before the photo is taken.
Note:
the camera will return to the camera mode if you don
’t press the Shutter/OK button within 5 seconds.