DLP Projector—User’s Manual
–
9
–
S
ETUP AND
O
PERATION
Starting and Shutting down the Projector
1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The
POWER
LED on the projector
light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED not a flashing.
Then press the
POWER
button to
turn on the projector.
The projector splash screen displays and
connected devices are detected.
See
Setting an Access Password
(Security Lock)
on page 11 if security
lock is enabled.
4.
If more than one input device is
connected, press the
SOURCE
button
and use
▲▼
to scroll among devices.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
VGA1 / VGA2(*): Analog RGB
Composite Video(*): Traditional composite video
S-Video(*): Super video (Y/C separated)
HDMI(*): High-Definition Multimedia Interface
Note :
(*)
Not available in some model