18
Z
Y
X
A
B
!
WARNING
ADJUST VERTICALLY
THE ROTATION SCREW
40
40
SCREEN
H
A
B
B:4-M4*10 ADJUST VERTICALLY
TIGHTEN SCREWS
FRAME
2
ADJUSTING STEP 6
Instruction of image up and down adjustment movement:
1: Loosen screw “B” (4-M4*10mm) slightly. In order to adjust the image’s up and down position, turn “M” (up and
down adjustment rotation screw) to make sliding structure frame #2 up and down, so as to adjust the image
position up and down (Z axis direction).
2: Please refer to the projector distance sheet.(P.7) for the highest position of screen to the projector’s up and down
distance (H1).
3: When the image up and down position is well adjusted, tighten screw. “B” (4-M4*10mm)
4: The maximum adjustable distance is ±40mm.
AFTER ALL THE ADJUSTMENT, PLEASE TIGHTEN ALL SCREWS AND NUTS, OTHERWISE, THE PROJECTOR
AND WALL MOUNTED BRACKET MAY FALL AND CAUSE PERSONAL INJURY OR PROPERTY LOSS.
