37
DLP Projector - User’s Manual
y
Blanking
Use this function to adjust the edges of the image and hide unwanted sections of the screen.
y
TOP
Press
on the remote control to adjust the top blank-
ing area on the projected image.
y
Bottom
Press
on the remote control to adjust the bottom
blanking area on the projected image.
y
Left
Press
on the remote control to adjust the left blank-
ing area on the projected image.
y
Right
Press
on the remote control to adjust the right
blanking area on the projected image.
y
Reset
It will reset all the blanking functions to the default set-
tings that is without any blanking functions enabled.
P
P
Use left blanking
function to block
the additional
image on the
screen.
y
Edge Blend
Edge blend function requires multiple projectors simultaneously displaying on the same screen. Use this to adjust
the uniformity of the images.
To use this function, Edge Blend must be enabled on both projectors.
y
Edge Blend
1. Press
Menu
to activate menu.
2. Press
to select Alignment and press
Enter
.
3. Press
to select Edge Blend and press
Enter
.
Note:
Notice that red and green lines appear to indicate the edge of the screen. The green lines indicate the start/end of
the blend zone.
y
Blend Width
The menu White Level allows for Top, Bottom, Left, and Right adjustment of a blending zone.
1. Press
Menu
to activate menu.
2. Press
to select Alignment and press
Enter
.
3. Press
to select Edge Blend and press
Enter
.
4. Press
to select Blend Width and press
Enter
.
5. Select an adjustment zone and use
to correct the blend zone.
White Level
Top
Bottom
Left
Right
0
0
0
0
