4
5
System Connection
VCR, Stereo, VCD, DVD Player
Video : Please use S-Video as the first priority for Video input, thus having a
better image quality. Machines in early days, however, do not support S-Video;
these devices only have Video for output. Please attach the Video output cable
to the machine’s video input. If you attach the S-Video and Video
output cable to the machine, the machine will use S-Video as the first priority
for video input and at this moment, the video input for Video will not take any
effect.
Audio: To left audio input (White)
To right audio input (Red)
DVD, Satellite, Cable etc.
Input video and Audio signal to the monitor.
Video: To machine Y image input (Green)
To machine Pb/Cb image input (Blue)
To machine Pr/Cr image input (Red)
Audio: To left audio input (White)
To right audio input (Red)
Use the Remote control or Machine front "Input" key to
select the Input source to
AV1 IN
or
AV2 IN
Use the Remote control or Machine front "Input" key to select
the Input source to
COMP1 IN
or
COMP2IN
If you are already using the COMP IN input for another
component, or you do not want to use the COMP IN input
for the DVD player, you can connect the DVD player to the
COMP2 IN group of connections.
Refer to your DVD player user manual for more information
about the video output requirements of the product.
Stereo amplifier
Speaker System
These terminals are used
for connecting a stereo
amplifier for Digital TV
Audio Signals only. They
relay (pass-through) the
audio signals of all DTV
programs displayed on the
RPTV screen.
Rear Connector - 1
