Network Deployment Guide for NovoConnect
V1.0 Page
10
of
18
As described in Section 1.3, you can enable the routing between LAN and Wi-Fi Hotspot. Once
you enable this routing feature, devices on the Wi-Fi Hotspot side will be able to access intranet
or Internet resources via the LAN connection.
Notes on Network Security: before you enable this routing feature,
1)
You may consult your organization’s IT administrators to avoid compromising your
network security.
2)
Wi-Fi Hotspot by default is an open network. It is strongly recommended that you change
it to a secure Wi-Fi network.
2.
Port Numbers and Intranet Firewall
NovoConnect devices are TCP/IP-network-based devices, and the communications between a
NovoConnect device and its client devices (e.g. laptops, tablets, etc.) are achieved through
several TCP and UDP ports. The following table summarizes all the port numbers being used by
NovoConnect devices.
