3
STEP 2
Close the drawer and lock using the keys
(F)
. Assemble the support brackets
(E)
to the drawer using M5x10 screws
(B)
,
and tighten with the screwdriver
(C)
.
STEP 3
B
C
E
Use the drill template
(G)
to mark drilling locations at the desired drawer location
underneath the desk. Drill 3/8” (10mm) deep holes using a 1/8” (3mm) drill bit, then install
the drawer to the desk using ST4.2x16 screws
(A)
with the screwdriver
(C)
.
