3
OPTION B:
Mounting with Keyboard Tray
Place Desk Sleeve
(A)
on the desktop at the desired location. Measure the space between the
underside of the desktop and the lower portion of the sleeve to determine the required Spacers
(S-E)
and Washers
(S-D)
for mounting. Remove Desk Sleeve
(A)
from the desktop.
Install front end of the keyboard mount (not provided) to Desk Sleeve
(A)
using either the M5x8
Screws
(S-B)
or M6x8 Screws
(S-C)
, depending on the keyboard mount to be installed. Tighten with
a Phillips screwdriver.
DESK
/M6X8
M5X8
M5X35
20X6.2
15X5.3X1.2
S-B
S-C
A
Fit Desk Sleeve
(A)
with keyboard mount to the desktop. Drill 10mm deep pilot holes in the desktop
for the desk sleeve and the rear end of the keyboard mount using a 3mm (1/8”) drill bit.
Secure Desk Sleeve
(A)
and keyboard mount to the desk using M5x35 Screws
(S-A)
and previously
counted Spacers
(S-D)
and Washers
(S-E)
. Tighten with a Phillips screwdriver.
S-E
S-D
S-A
