2
3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
Scissors
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 2
WARNING!
A
(x1)
Adjustable
Desktop
B
(x1)
4mm Allen
Wrench
STEP 1
Carefully remove desk
(A)
from packaging and
set on a flat surface.
Cut shipping ties from desk. Turn desk upside down, and rotate front feet to extend forward. Secure
feet using bolts
(C)
and tighten with Allen wrench
(B).
Apply pads
(F)
to underside of frame near the
back as shown. Use cable clip (
D
) and cable ties (
E
) to manage cables.
33lbs
14.97kg
C
(x2)
Bolt
D
(x1)
Cable Clip
E
(x2)
Cable Tie
F
(x2)
Foot Pad
A
S=4mm
C
F
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.