3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Ceiling
Using ceiling template
(C)
, mark exact location of
mounting holes. Drill pilot holes 2.2” deep using
a 4.5mm drill bit. Insert two screws
(W-A)
, leaving
a 5mm gap from ceiling. Hang the ceiling mount
so that the screws fit into the keyhole openings.
Slide mount forward, then secure using additional
screws
(W-A)
with washers
(W-C)
. Tighten all
screws.
OPTION B: Concrete Ceiling
Using ceiling template
(C)
, mark exact location of
mounting holes. Drill pilot holes 2.4” deep, using a
10mm drill bit. Insert six concrete anchors
(W-B)
,
then tighten two screws
(W-A)
, leaving a 5mm gap
from ceiling. Hang the ceiling mount so that the
screws fit into the keyhole openings. Slide mount
forward, then secure using additional screws
(W-A)
with washers
(W-C).
Tighten all screws.
NOTE:
If mounting to a wood beam ceiling,
ensure the front and back holes are used for
the main support if mount is in line with the
beam. If perpendicular to the beam, use keyhole
openings for the main support. Do NOT use
included concrete anchors
(W-B)
for wood or
drywall.
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
