4
STEP 3
OPTION B: Concrete Ceiling
Hold mount (
A
) to mounting surface and mark drill holes with pencil. Drill 2.4” (60mm) deep holes
using a 3/8” (10mm) drill bit. Insert anchors (
W-B
). Insert screws (
W-A
) into front two holes, leaving
3mm of thread exposed.
OPTION A: Wood Beam Ceiling
Hold mount (
A
) to mounting surface and mark drill holes with pencil. Drill 2.2” (55mm) deep holes
using a 3/16” (4.5mm) drill bit. Insert screw (
W-A
) into front hole, leaving 3mm of thread exposed.
Slide mount onto front screw. Insert screw (
W-A
) with washer (
W-C
) into back hole. Tighten all screws.
W-C
W-A
W-A
W-B
W-A
