4
STEP 3
OPTION A: Wood Beam Ceiling
Hold mount (
A
) to mounting surface and mark drill holes with pencil. Drill 2.5” (64mm) deep holes
using a 1/8” (3mm) drill bit. Insert screws (
W-A
) into front two holes, leaving 3mm of thread exposed.
Slide mount onto front two screws. Insert screws (
W-A
) with washer (
W-C
) into back two holes. Tighten
all screws. (
NOTE:
Wood beam must have a width of at least 5” to properly support the mount)
D
Option
2.5
�
(64mm)
3mm (0.12
�
)
A
A
W-A
W-C
Ø1.8” (3mm)
W-A
