3
OPTION B: Wood Stud Mounting
Place the shelf
(A)
against the wall
and mark two drilling locations
with a pencil. Use of a stud finder
is highly recommended. Drill 2.2”
(55mm) deep holes using a 3/16”
(4.5mm) drill bit, then install the
shelf to the wall using ST6.3x55
screws
(P)
with D8 washers
(N)
.
STEP 2
Remove the clear plastic backing from pad
(B)
and place
onto the top of the shelf
(A)
. The shelf is now ready for use.
OPTION C: Concrete/Brick Wall
Mounting
Place the shelf
(A)
against the wall
and mark two drilling locations with
a pencil. Drill 2.4” (60mm) deep holes
using a 3/8” (10mm) drill bit. Insert
the M10x45 concrete anchors
(Q)
into
the holes, then install the shelf to the
wall using St6.3x55 screws
(P)
with D8
washers
(N)
.
STEP 1
(Continued)
