2
Assembly Steps
Step 1
For concrete or brick wall installation, use a pencil to mark drilling
locations and drill 2/4” deep holes using a 3/8” bit. Mount arm (A) to
wall using screws (W-A) , anchors (W-B), washers (W-C).
Option B: Concrete/Brick Wall Installation
Use a pencil to mark drilling location for wood beam and drill 2.2”
deep holes using 3/16”bit. Use of a stud finder is recommended.
Mount arm (A) to wall using screws (W-A) and washers (W-C). Do
NOT use anchors (W-B) for wood beam installation.
Option A: Wood Wall Installation
Press covers into screw holes.
Step 2
