5
STEP 4
OPTION A: Wood Beam Ceiling
Locate beam using a stud finder, then using a 1/8” drill bit, drill two 2.3” deep holes exactly 4” apart.
Insert M8x60 screws
(N)
, leaving 10mm of thread exposed, then hang the ceiling plate
(B)
with post
(A)
on the screws and tighten.
OPTION B: Concrete Ceiling
Place the ceiling plate
(B)
against the ceiling and mark drilling locations with a pencil. Using a 3/8”
drill bit, drill 2.5” deep holes in the ceiling and insert anchors
(O)
. Insert x2 M8x60 screws
(N)
, leaving
10mm of thread exposed, then hang the ceiling plate
(B)
with post
(A)
on the screws. Insert x2
additional M8x60 screws and tighten.
