background image

 

 

If you do not understand these directions, or if you have any 

doubts about the safety of the installation, please call a 

qualified technician. Check carefully to make sure there are no 

missing or defective parts. Improper installation may cause 

damage or serious injury. Do not use this product for any 

purpose that is not explicitly specified in this manual. We 

cannot be liable for damage or injury caused by improper 

mounting, incorrect assembly, or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371-5654

For more VIVO products, check out our 

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact 

us. We are happy to replace parts to ensure you have a fully 

functioning product. 

 

Safety Steps Warning

   

Contact us Required:  at: MOUNT-VW03G

Last updated: 04.24.18

   

Adjus Required: t as Required:  Des Required: ired

To adjust gas spring lift strength, turn the screw on the top of the center 
joint using the large Allen key (G). Clockwise will reduce strength, and 
counter-clockwise will increase. NOTE: If the mount makes a popping noise 
when raising or lowering, tighten the socket set screw on top of the 
adjustment screw. Adjust tilt joint using the smaller Allen key (F). Organize 
cables using the built-in cable management clips.

4

Summary of Contents for MOUNT-VW03G

Page 1: ...age Contents Required 1 Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product https Required MOUNT VW03G vivo us Required com products Required mount vw03g A x1 B x2 C x8 D x2 E x2 F x1 G x1 H x1 I x1 W A x5 W B x5 W C x5 M A M5x14 x4 x4 x4 M B M6x14 x4 x4 x4 M C M8x20 x4 x4 x4 M D M6x30 x4 x4 x4 M E D5 x4 x4 M F D8 x4 x4 M G x8 M ...

Page 2: ...e leaving 3mm of thread exposed Hang top hole in mount over the bolt and secure using two more bolts W A with washers W C Tighten all bolts Option A MOUNT VW03G Wood Wall 2 Step 2 Continued Option B MOUNT VW03G Concrete Brick Wall NOTE Do not use concrete anchors W B with wood studs Use mount A to mark mounting holes on wall Using a 3 8 drill bit drill holes at least 2 4 deep into marked locations...

Page 3: ...quired Step 6 Attach VESA plate to mount A using previously remove nuts and wrench H as shown in diagram Step 3 Attach covers B to mount A Secure VESA adapters D E to VESA plate using bolts C in the appropriate configuration to match your televisions mounting holes NOTE VESA adapters are not required for VESA patterns 200mm and smaller Step 4 ...

Page 4: ... more VIVO products check out our website at www vivo us com If any parts are received damaged or defective please contact us We are happy to replace parts to ensure you have a fully functioning product Safety Steps Warning Contact us Required at MOUNT VW03G Last updated 04 24 18 Adjus Required t as Required Des Required ired To adjust gas spring lift strength turn the screw on the top of the cent...

Reviews: