3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Use TV plate
(A)
to mark mounting locations on wall for drilling. Use of a stud finder is highly
recommended. Drill 1.2” deep holes with a 3mm or 1/8” drill bit, and anchor TV mounting plate
(A)
to
wall using screws
(M)
and washers
(L)
.
OPTION B: Concrete Ceiling
Use TV plate
(A)
to mark mounting locations on wall for drilling. Drill 2.4” deep holes using 10mm or
13/32” drill bit. Press anchors
(N)
into wall, and anchor TV mounting plate
(A)
to wall using screws
(M)
and washers
(L)
.
