6
STEP 7
Assemble the chair back
(L)
to the brackets on the chair seat
(K)
using chair back
bolts
(Q)
and tighten with a Phillips screwdriver. Install the left and right side covers
(M, N)
to the brackets using the side cover bolts
(R)
, and tighten with a Phillips
screwdriver.
STEP 8
OPTION A: Right Side Shift Lever
Attach the shifter mount
(W)
to the shifter support bar
(V)
using M6x15 bolts,
making sure the long end faces back, and tighten with a Phillips screwdriver. Install
the shifter support bar
(V)
to the right side of the frame using M8x50 bolts
(Y)
and
nuts
(Z)
. Tighten using the 5mm Allen wrench
(C1)
and wrench
(D1)
. Adjust the
mount angle by removing the pre-installed bolts from the sides, then reinstall while
holding the mount at the desired angle.
