6
STEP 9
STEP 10
Slide monitor onto mount
(G)
and secure with thumbscrew
(I)
. Tighten or loosen joints with allen
wrenches
(A1,B1)
. Allen wrenches
(A1,B1)
can be stored in cable management clip on pole
(C)
.
OPTION A: Flat Back Monitor
Attach VESA plate
(H)
to monitor. For flat back
monitors use screws
(M-A or M-C)
and washers
(M-E)
.
OPTION B: Curved Back Monitor
Attach VESA plate
(H)
to monitor. For curved
back monitors use screws
(M-B or M-D)
,
washers
(M-E)
, and spacers
(M-F)
.
STEP 11
Adjust gas spring tension using the 6mm Allen wrench
(B1)
. Turn counter-clockwise to increase lift,
and clockwise to decrease. To adjust height of mount, lift release handle, then raise or lower mount
to desired height.
NOTE:
use a large flat-blade screwdriver to tighten the socket set screw if the joint
makes a popping noise.
H
M-E M-A
M-C
H
M-B
M-D
M-E
M-F
B1
A1
2
1
I
3
A1
B1
ON
OFF
B1
