6
STEP 14
Place computer in mount
(H)
and tighten with straps
(I)
.
Attach straps (
I
) to small half of mount (
H
) as shown in diagram. Place mount against wall where
desired and mark holes with a pencil. Drill 2.4” (60mm) deep holes using a 3/8” (10mm) drill bit, and
insert anchors (
W-B
). Use screws (
W-A
) to attach mount to wall.
STEP 12
STEP 13
Replace second half of mount
(H)
and secure with knobs as shown in diagram. Attach straps
(I)
to
second half of mount
(H)
.
NOTE:
The CPU mount is only designed for mounting to a brick or concrete wall.
I
2
W-B
W-A
1
2
2
1
