3
ASSEMBLY STEPS
STEP 1
110lbs
(50kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Screw casters
(B)
into underside of base
(A)
. Adjust casters
(B)
to sit flat on surface if needed, and
tighten nuts using wrench
(C1)
as shown.
STEP 2
Loosen screws on each side of columns
(E, F)
using the Allen wrench
(B1)
to adjust height to desired
level, then tighten. (
CAUTION:
Hold inner column when loosening for adjustment). Ensure both
columns are at the same height using the height indicators as guides.
A
B
C1
B1
B1
F
PER SCREEN
11lbs
(5kg)
DVD SHELF
TOOLS NEEDED
11lbs
(5kg)
CAMERA SHELF
