2
PACKAGE CONTENTS
WARNING!
A
(x1)
Clamp
B
(x1)
Padding
C
(x1)
Platform
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
33lbs
(15kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
S-A
(x4)
M5x10
S-B
(x1)
Magnet
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
•
NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
•
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
T-A
(x1)
3mm Allen Wrench
ASSEMBLY STEPS
STEP 1
Clamp
(A)
comes preassembled to fit desktops with a thickness of 10-50mm. For desktops with a
thicknes between 40-85mm, Clamp
(A)
can be adjusted by removing screws in back of assembly using
4mm Allen Wrench
(T-B)
and and reassembling using the bottom two holes.
T-B
A
T-B
(x1)
4mm Allen Wrench
