background image

 

Note:  Before the press of this button, please put enough ice into the shaved ice bowl and cover 

the bowl cap well. 

Step 8. 

Press 

  button to stop the machine. 

Step 9. 

Put a tank in below the unit, then pull the unit a little forward, pull the drain plug at middle of the tank to 

drain water. 

Step 10. 

If you want to take off the pipe, sketch as above: first, take off the blue ring A (if any), then press the 

white ring (lock) at the outer side B. Finally take out the pipe. 

 

 

Caring 

1.Clean the inner liner, ice collecting tray, water box, ice shovel, and evaporator frequently. When   

  cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to   

  clean the inside and the outside surface of the Ice maker. Do not spray Ice maker with chemicals or   

  diluted agents such as acids, gasoline, or oil. Rinse thoroughly before starting.   

2.Keep ventilation openings in the appliance enclosure, or in the built-in structure, clear of all obstruction. 

Do not use mechanical devices or other means to accelerate the defrosting process, other than those 

recommended by the manufacturer. 

3.To ensure the cleanliness of the ice cubes, water in the water reservoir is suggested to be replaced 

every 24 hours.   

5.If the compressor stops for any reason such as water shortage, too much Ice, power off, etc... Do not   

  start the system right away, wait 3 minutes, and then re-start the Ice maker.   

6.Always use fresh water before starting ice production either at initial installation or after a long shut-off   

  period. 

7.This unit is for home use only, not for outdoor use. If it you need to use the device outdoors please 

ensure that the view window is closed properly. 

 

Safety Notice 

In order to avoid any accidents, please refer to following operation: 

1. Disconnect power before servicing. 

2. Do not pull directly on wire when plugging or unplugging the unit. 

3. If ice is abnormal, please call the seller. 

4. It is normal for the compressor and condenser surface to reach temperatures between 70°C and 90°C 

during operation and surrounding areas may be hot. Please do not touch the device. 

5. Du

e to fast freezing, ice cubes may appear “Cloudy”. This is trapped air in the water and it will not 

affect quality or taste of ice. 

Summary of Contents for VH835







Reviews: