HDBaseT 2.0 KVM Extender Set
6
b)
Connect Mouse/ Keyboard/U-disk to the
USB IN
port(s) of Receiver.
Step5.
When using the bi-directional RS232 control, do the following:
a)
Connect PC to the RS232 port at either the Transmitter or the Receiver.
b)
Connect a third-party device (such as projector) need to be controlled to
the
RS232
port at the other end.
c)
Send RS232 commands to control the third-party device. For more details
about RS232 commands, please refer to the user manual for the third-
party device.
Step6.
Connect with DC12V power adaptor to the power port of Transmitter, the
Receiver will be powered synchronously via PoC.
1)
System Diagram shown in this manual is for reference only, more specific
schemes depend on real-time applications.
2)
Connect HDBT ports via straight-thru CAT5e/6 cable with TIA/EIAT568B standard
terminations at both ends.
3)
RS232 communication protocol: Baud Rate: 9600; data bit: 8; stop bit: 1; parity:
none. HDBT Transceiver receives RS232 control from devices with various baud
rate (2400, 4800, 9600, 19200, 38400, 57600, 115200).
4)
HDBT ports can work with
our company’s HDBT products that has same power
supply solution.
3.4 Application
Compliant with HDBT2.0, HDBaseT 2.0 KVM Extender Set has a good application in
occasions where high-definition AV distribution, long-distance transmission, Ethernet
Switch are needed, such as computer realm, monitoring, big screen displaying,
meeting room, education and bank & securities institution etc.
