HDMI 2.0 2x8 Splitter with Audio Breakout and 4K@60Hz to 1080P Down-Scaling
8
5. EDID Management
The Extended Display Identification Data (EDID) is used by the source device to match
its video resolution with the connected display. By default, the source device obtains its
EDID from the first connected display. Meanwhile, since the displays with different
capabilities are connected to the splitter, the 3-pin DIP switch on the front panel and the
4-pin DIP switch on the rear panel can be used in combination to set the EDID to a
fixed value to ensure the compatibility in video resolution.
Switch Status
Description
L.RES
The splitter reads all EDID information from all connected
displays, and choose the one with lowest resolution passing to the
source.
PRESET
In this mode, the 4-pin DIP switch on the rear panel can be used
to select predefined EDID and customize a specific EDID as
need.
H.RES
The splitter reads all EDID information from all connected
displays, and choose the one with highest resolution passing to
the source.
