HDMI 2.0 2x8 Splitter with Audio Breakout and 4K@60Hz to 1080P Down-Scaling
5
3. Panel Description
3.1 Front Panel
①
POWER LED:
The LED illuminates red when power is applied.
②
OUTPUT LEDs:
The LED illuminates green when there is HDMI output on the
corresponding channel.
③
SOURCE Button and LEDs:
Press the button to switch to next source device, and then the corresponding
input LED will illuminate green.
Press and hold the button at least three seconds to enable automatic switching
mode. The splitter will automatically select the first available active source
device starting at HDMI input 1.
Upon detecting a new source device connect, the splitter will automatically
select the new one. When an active source device is removed, the splitter
will switch to the next one.
Once restart the splitter, it will resume the last switching status.
Press and hold the button at least three seconds again to exit automatic
switching mode, and the current channel wo
n’t be changed.
④
DISPLAY ON Button and LED:
Press the button to turn on displays. The LED
blinks green when press this button to send control signal.
⑤
DISPLAY OFF Button and LED:
Press the button to turn off displays. The LED
blinks green when press this button to send control signal.
⑥
VOLUME DOWN/MUTE Button:
Press the button to decrease the volume of
displays. Press and hold this button at least three seconds to mute the displays.
⑦
VOLUME UP Button:
Press the button to increase the volume of displays or exit
1
2
3
4
5 6 7
8
9
