ViVOpay Kiosk II User Guide
631-0071-00
ViVOtech Proprietary
Page
14 of 19
2.7 Using the ViVOpay Kiosk II to Make a Purchase
2.7.1 Presenting Cards, Fobs, or NFC Phones
Your new ViVOpay Kiosk II allows for credit/debit card purchases using the new contactless
technology.
Present the card/fob/phone in close proximity to the front portion of the antenna module. Present
the card/fob/phone so that maximum surface area is parallel to the antenna module as shown
below. The antenna should beep and all four green LEDs should illuminate briefly to indicate a
successful test.
This tests the antenna's ability to read the RFID test card. If unsuccessful, there will be no reaction
from the reader. If you use a test card and the ViVOpay reader is attached to the ViVOpay Kiosk II
Controller, a dummy transaction can be tested. The transaction will not be authorized and will
come back with a response, but will at least test for end-to-end connectivity.
2.7.2 Making a Purchase
1. After the transaction has been entered on the kiosk control panel, the customer should
present their card/fob/phone in close proximity so that maximum surface area is parallel to
the antenna.
• A single beep and all four LEDs briefly flashing indicates the card/fob/phone has been read
correctly.
