ViVOpay Kiosk II User Guide
631-0071-00
ViVOtech Proprietary
Page
5 of 19
1 Overview
The ViVOpay Kiosk II is a compact stand-alone contactless reader designed to support
contactless transactions based on ISO 14443 Type A/Type B/MiFare compatible cards, fobs and
tags as well as NFC phones. The ViVOpay Kiosk II is comprised of a compact controller module
and an antenna module packaged individually. This two-part design allows the controller module
to be installed within the cabinetry of a kiosk and the antenna installed on an exterior surface with
a separation of up to 1 meter. The antenna is available with a square or angled bezel.
The ViVOpay Kiosk II supports USB and serial RS-232 host communication using the protocol
defined in the
Global Reader Serial Interface Developers Guide
. The ViVOpay Kiosk II is designed
to support a wide input power range. Both data and power can be supplied via a single cable to
reducing the effort and complexity of installation.
1.1 Features
Supports ISO 14443 Type A, Type B, MiFare and NFC based contactless transactions
32-bit Microcontroller with ample memory capable of supporting
future application upgrades
Crypto data processing for contactless EMV cards
RS-232 (9600, 19200, 38,400, 57,600, 115,200 baud) host interface
RS-232 or USB data communications
Small antenna flush-mounted on external cabinetry with square or
angled bezel
Internal mounted controller board with 1 meter controller/antenna separation
1.2 Valid Card Types
ViVOpay Kiosk II supports the following contactless payment applications in the latest release of
firmware:
ISO 14443
PayPass M/Stripe
PayPass M/Chip
PayPass MXI
VisaWave 1 and 2
VisaPay/Wave MSD and qVSDC
JCB J/Speedy
JCB Mobile/QuicPay
American Express
– ExpressPay
Discover Zip
ViVOcard 1, 2, and 3
Mifare ePurse
