Applying Power
The
ViVOpay Kiosk
does not have a switch to turn on/off power. After
connecting the cable from the Reader to the host apply power to the host and/or
power supply. The Reader will perform a power-up sequence as follows:
All LEDs will illuminate an internal self-test is being performed.
The default RS-232 parameters (19,200 bps, 8 data, 1 stop, no parity) will be set.
If self-test and initialization is successful the beeper will emit two short beeps
and the leftmost LED will remain illuminated indicating the Reader is ready.
With the power-up sequence successfully completed, the unit will read a valid card
or tag if presented and send the data to the host.
Document:
Proprietary & Confidential
