VIVOTEK
406 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
258
PARAMETER VALUE
DESCRIPTION
function
zoom,
focus,
auto,
scan,
stop,
positioning,
irisopen,
irisenable,
getstatus
Function type
zoom
- Move focus motor
focus
– Move focus motor
auto
– Perform auto focus
scan
– Perform focus scan
stop
– Stop current operation
positioning
– Position the motors
irisopen
– Fully open iris. It will maintain fully open iris
status until sending function=irisenable cgi.
irisenable
– return back to user setting status of iris.
getstatus–Information of motors, return value as below:
remote_focus_zoom_motor_max
: Maximum steps of
zoom motor
remote_focus_focus_motor_max
: Maximum steps of focus
motor
remote_focus_zoom_motor_start
: Start point of zoom
motor
remote_focus_zoom_motor_end
: End point of zoom
motor
remote_focus_focus_motor_start
: Start point of effective
focal length
remote_focus_focus_motor_end
: End point of effective
focal length
remote_focus_zoom_motor
: Current position of zoom
motor
remote_focus_focus_motor
: Current position of focus
motor
remote_focus_zoom_enable
: Current function of zoom
motor
remote_focus_focus_enable
: Current function of focus
motor
remote_focus_iris_open
: The current status of iris. 0:
irisenable, 1: irisopen
Current function of zoom/focus motor, return value as
below:
0: no service
1: zooming
2. focusing
3: auto focus
4: focus scan
5: positioning (both zoom motor and focus motor)
12: reset focus
