background image

 

 

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

 

12 - User's Manual

 

 

WAN Settings Configuration

If you want to access the Network Video Recorder over the Internet, please go to 

Configuration 

> Network

 to assign a WAN IP address (public IP) for NR7401. There are three ways to get a 

WAN IP address: 

Privite DHCP (Dynamic IP)

Static IP address

, and 

PPPoE (DSL)

Internet connection with private DHCP (dynamic IP)

Choose this connection type

 to automatically obtain a dynamic IP address assigned by a DHCP 

server� Please follow the steps below to verify the settings:

1� Go to 

Configuration > Network

 

Click

 LAN > Get IP address automatically.

2� Click 

Apply

 to enable the settings�

3. If your computer is in the same domain with the WAN IP address, then you can 

use VIVOTEK 

Installation Wizard 2 (IW2) to search for the Network Video Recorder easily. 

Please follow the steps below to run IW2:

a. Install the IW2 under the Software Utility directory from the software CD. 

    Double-click the IW2 shortcut on your desktop to launch the program.

b� The program will conduct analyses on your network environment� 

    After your network environment is analyzed, please click Next to continue the program.

c� The program will start search for all VIVOTEK devices in the same LAN�

Summary of Contents for NR7401




















































Reviews: