EN - 10
1. Check the SSID for your wireless access point (AP).
2. Go to the PZ7112 / PZ7122's Configuration page > Advanced mode > Wireless LAN.
3. Type in the SSID the same as your AP.
4. Select the Wireless mode as "Infrastructure".
5. Click
Save
. The Network Camera will reboot.
Note
1. SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless
network. The PZ7112 / PZ7122 factory SSID setting is set to "default".
2. Select "Ad-Hoc" wireless mode if you want the PZ7112 / PZ7122 to communicate without
using an AP or wireless router.
e e
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
ADSL/Ca
ble/Hub
AP
AV Out
For further setup, please refer to the user's manual on the software CD.
Configure the Wireless Connection
(PZ7112 / PZ7122 only)
7
PZ7112 / PZ7122
6. Wait for the live image to be reloaded to your browser. Then, unplug the power cable and
Ethernet cable from the Network Camera.
7. Replug the power cable to the camera. The Network Camera will now operate in wireless
mode.
Summary of Contents for PZ7111
Page 1: ......
Page 12: ...P N 625006701G Ver 1 11 ...
