background image

2

3

4

7

6

5

8

9

EN | 

15

 

14 

|

 

EN

Store the water dispenser in the follow-

ing conditions:

• 

Do not store outdoors.

• 

Store in a dry, frost- and dust-free 

location.

• 

Do not expose to any aggressive 

materials.

• 

Avoid mechanical shocks.

• 

If storing for over 3 months, regularly 

check the general condition of all 

parts and of the packaging.

• 

Store vertically.

Use according to the intended purpose: 

The water dispensers of the VIVREAU 

TOP product range are solely designed 

to dispense different water types. The 

water dispensers may only be used 

with tap water provided by the public 

water supply. The public water supply 

shall fulfill the requirements for drinking 

water quality. 

The water dispensers are designed for 

professional use within the hospitality 

industry, catering services, hospitals, 

business buildings and offices, etc.

The dispensed water is only intended 

for immediate consumption.

The use according to the intended pur-

pose assumes compliance with all the 

information contained in these instruc-

tions.

Any use beyond the intended purpose 

or other types of use are considered 

misuse.

In the event that public authorities  

request that the public water must  

be boiled, this also applies to filtered 

water dispensed from this applicance.

Once the request has ended, the inlet 

water filter must be replaced and the 

connections cleaned. Please contact 

customer service for this purpose (see 

rear page).

STORAGE

INTENDED USE

LOCATION

OVERVIEW

1. 

Touch control panel

2. 

Outlet tap

3. 

Dispensing tap

4. 

Integrated drip tray

5. 

Cooler-Carbonator

6. 

On/Off switch

7. 

Undercounter display

8. 

Vent hood

9. 

VIVREAU waste water container  

(optional)

Please observe the foldout page!

CONTENTS

Safety instructions 

4

Overview 14

Used symbols 

14

Intended use 

15

Location 15

Storage 15

Using the device 

16

•  Dispensing water 

17

•  Errors and Warnings 

18

•  Standby 18

Menu structure 

20

Settings 22

•  Portion Settings 

22

•  Temperature setting 

22

Maintenance 23

•  Empty drip tray 

24

•  Cleaning the housing 

24

•  Disinfecting the outlet tap 

24

•  Cleaning the cooling fins 

25

•  Check the CO

2

 bottle 

25

Replacing CO

2

 gas bottle 

26

Period of inactivity 

28

Troubleshooting 30

What to do in an emergency 

32

•  Water leakage 

32

•  Refrigerant leakage 

32

•  CO

2

 leakage 

32

•  Electric shock 

32

Technical data 

34

Identification plate 

35

Dismantling and disposal 

35

USED SYMBOLS

WARNING!

  

Indicates that suitable proce-

dures must be adopted to avoid 

putting people’s health and 

safety at risk or causing eco-

nomic losses.

CAUTION 

 

Indicates a potentially hazard-

ous situation which, if not 

avoided, may result in property 

damage, minor or moderate 

injury.

 

IMPORTANT 

 

Indicates important technical 

information which must not be 

overlooked.

  Warning of dangerous voltage.

  Danger of combustibility.

 Please read this user manual 

carefully and keep it for further 

reference.

WARNING!

 

Make sure that the device 

is always sufficiently ventilated. 

Never obstruct or block the venti-

lation slots or cooling fins. Always 

keep the distance to walls and 

other objects as described in the 

information sheet delivered by the 

manufacturer. 

The water dispenser may not be 

installed near direct or indirect 

heat sources.  Hoses and cables 

must not come into contact with 

heat sources.

 

The CO

2

 bottle must be placed 

as far as possible from any heat 

sources and the ambient temper-

ature should not exceed 90 °F.

To relocate the installed device, 

please contact customer service 

(see rear page). Any relocation 

must be carried out by a qualified 

person and documented in the log 

book.

For more information, see “Safety 

Instructions”, page 4-13.

1

I. VIVREAU Extra Tap System

Summary of Contents for Extra 85 HygienePlus VIV E 85 I-26-C2-HP-J




















Reviews: