24
|
EN
EN |
25
Cleaning the cooling fins
Check the CO
2
bottle
Clean the cooling fins with a suita-
ble brush or scrubber.
WARNING!
The cooling fins are very sharp
edged! Danger of injury!
WARNING!
Never cover up the cooling fins
or place objects on front of the fins,
danger of damage to appliance.
Check the fill level of the CO
2
bottle
If the pressure display on the
gauge for the bottle pressure
A
is
indicating the red zone, change
the bottle (see ‘Replacing CO
2
gas bottle’ on page 30).
A
CAUTION
Please contact
customer service for
further information
about appropriate
cleaners and disinfec-
tion products.
MAINTENANCE
1.
Pull the drip tray
(3)
out towards you and
empty it.
2.
Check the drainage
function.
3.
Remove the grille
from the drip tray
(3)
and clean both.
4.
Reinstall the grille.
5.
Replace drip tray
(3)
.
Spray the outlet tap
(2)
with a disinfectant al-
cohol spray suitable for
food/beverage contact
use.
WARNING!
Danger to health
from contamination!
Not following the hy-
giene guidelines can
lead to contamination
of the end product and
could be harmful for the
consumer.
1.
Only touch the outlet
tap with a sterile and
lint-free cloth.
2.
Only touch the outlet
tap for cleaning.
Please observe the foldout page!
Empty drip tray
Cleaning the housing
Disinfecting the outlet tap
1.
Clean the stainless
steel surfaces of
the housing with
a cleaner suitable
for stainless steel
surfaces.
2.
Clean the black
plastic surfaces of
the housing with
a cleaning agent
suitable for plastic.
3.
Clean the con-
trol panel with a
lint-free cloth and
a mild cleaning
agent.
Rub off with a dry,
lint-free cloth.
CAUTION
The detergent
shall not contain any
acid or other aggres-
sive or abrasive liquid
or material. Do not
use cleaning agents
containing hydrogen
peroxide.
CAUTION
Please observe
the manufacturer’s
instructions for the
cleaning agents.
1.
3.
2.
5.
4.
I. VIVREAU Top Tap System
1
2
3
(5)
(6)
4
