background image

 

34 

|

 

EN

EN | 

35

The identification plate is on the back of the appliance.

Once the end of use for the water 

dispenser has been reached, it must be 

dismantled and undergo environmen-

tally friendly disposal.

The dismantling and disposal is to 

be carried out exclusively by per-

sonnel of the manufacturers or by  

qualified persons.

The pictogram with the crossed out dustbin points to the requirement for 

separate disposal of electrical and electronic appliances (WEEE). Electri-

cal and electronic appliances can contain hazardous and environmentally 

hazardous materials. Do not dispose of this appliance as domestic waste. 

Hand it in at a collection point for electrical and electronic waste. The packing 

material is 100 % recyclable. The various parts must therefore be disposed of 

responsibly and in full compliance with local authority regulations. By doing so, 

you will help to conserve resources and protect the environment. For further 

details, please consult your dealer or your local authorities.

IDENTIFICATION PLATE

DISMANTLING AND DISPOSAL

WARNING!

Danger to life from improp-

er dismantling!

Errors in dismantling can lead to 

life-threatening situations or sub-

stantial property and environmental 

damage. This leads to risks, among 

other things, from electrical current, 

carbon dioxide or CO

2

 bottle pres-

sure.

• 

The dismantling is exclusively to 

be carried out by the manufacturer 

or qualified persons.

• 

Consult the manufacturer, even in 

the case of a change of location.

• 

Refrain from unauthorized disman-

tling and change of location.

TECHNICAL DATA

Dimensions:

Countertop (W x H x D) 

10.9 x 20.9 x 20.4 in

Floorstanding (W x H x D) 

10.9 x 56.3 x 20.4 in

Dispensing height 

13 in

Weight:

Countertop 

88 lb

Base cabinet 

15 lb

VIVREAU Top 85

Cooling Performance

22.5 gal/h

Flow rate

0.5 gal/min

Voltage

120 V

Current, max.

4.1 A

Power consumption, max.

510 W

Frequency

60 Hz

Fuse, min.

10 A

Protection Class

I

CO

2

 operation pressure

0.45 MPa / 65 psi

Inlet water pressure, max.

0.6 MPa / 87 psi

Inlet water pressure, min.

0.25 MPa / 36 psi (at 0.5 gal/min 

waterflow) 

System operating 

inlet water pressure

0.4 MPa / 58 psi

Inlet water temperature

41 - 77 °F

Temperature range

60 - 89 °F

Max. relative humidity

60%

Refrigerant: R290

1.9 oz (56 g) 

Noise emission

< 62 dB(A)

Height above the sea level

< 6500 ft

VIVREAU TOP Series

Specifications may vary due to further development and improvement of the 

products.

Summary of Contents for Top 85




















Reviews: