16
|
EN
EN |
17
1.
Set a suitable vessel under the
outlet.
2.
Dispense the desired water type by
pressing the respective button.
3.
Press button until the desired
amount of water is dispensed.
Make sure not to overfill the
vessel.
Note:
A safety feature interrupts the
dispense after 90 seconds of contin-
uous dispense. Release and press
button again to continue dispensing.
Dispensing water
USING THE DEVICE
1.
1.
2.
2.
Chilled still:
Chilled still water
Sparkling (medium):
Moderately carbonated
sparkling water
Sparkling (classic):
Strongly carbonated
sparkling water
Ambient:
Ambient still water
With preset portions:
If a portion setting is activated,
the glass and the bottle icons are
shown in the display.
1.
Select desired portion size
(glass or bottle)
2.
Press the button of the desired
water type only once briefly.
Dispensing will stop automatically
when the preset quantity has been
reached.
By pressing any water type button
or by pressing “stop button” on
display, dispensing will stop imme-
diately.
1.
1.
2.
2.
USING THE DEVICE
The installation and initial commis-
sioning must be carried out exclu-
sively by the manufacturer or by a
qualified person.
For the floorstanding version (coun-
base cabinet) VIVREAU rec-
ommends to mount the base cabinet
to the wall.
Please contact customer service for
more information (see rear page).
Startup
On/Off
CAUTION
After over 24 hours of nonuse,
flush the water dispenser thoroughly
(see ‘Period of Inactiviy’ on page 28).
CAUTION
Ensure that the device has
been standing upright for 24 hours
before starting up! Danger of damage
to cooling system!
Please observe the foldout page!
The On/Off switch
(4)
is to be found
at the back of the water dispenser.
Set switch
(4)
to position
I
to switch
on. The switch lights up.
Set switch
(4)
to position
O
to switch
off. The switch light turns off.
I. VIVREAU Top Tap System
1
2
3
(5)
(6)
4
