VXI3232P
INSTRUCTION GUIDE
PAGE 2 of 3
PARTS
OPERATION FOR TIRE INFLATION
Take the 12 Volt power cable from the back storage compartment.
Make sure the Inflator Power Button is in the off position.
Start vehicle engine.
Plug inflator lighter plug into vehicle 12 Volt cigarette lighter socket.
Check manufacturer’s recommended tire pressure specifications indicated on the tire or your vehicle.
Take the air hose from the back storage compartment.
Attach the air hose nozzle to vehicle tire valve stem by threading the nozzle onto the stem clockwise until
secure. Wait about five seconds and the digital gauge will indicate the current tire pressure.
Select the desire reading pressure unit (PSI, BAR, kPa, kg/cm2) using the Unit Setting Button and with the
Pressure Setting Buttons set the desire pressure.
Push the Inflator Power Button to turn on inflator.
Once the desire pressure has been reached, the inflator will stop automatically.
Wait a few minutes as air hose and nozzle may be hot. Then, remove air hose nozzle from vehicle tire valve
stem by turning air hose nozzle counterclockwise.
Turn off vehicle.
Unplug inflator from vehicle 12 Volt cigarette lighter socket.
IMPORTANT
: The pressure gauge on the inflator is for reference only and is therefore not binding for exact values.
While inflating, the gauge is a measurement of the fluctuating pressure between the tire and the high pressure hose.
To reduce the risk of over-inflation, use a reliable pressure gauge periodically during inflation before driving a vehicle
inflated with the inflator.
