Vixen Air VXT4000P Installation Manual Download

Page: 2 / 3

VXT4000P

INSTALLATION GUIDE

PAGE 2 of 3

MOUNTING



Find a convenient mounting location in your vehicle for the air tank. This tank was specifically designed to be

install on the spare tire compartment. Ensure ports are reachable before drilling any holes.



Mark the location of holes using the mounting bracket of the air tank as a template, and then drill to size.



Using mounting hardware provided, secure the air tank.

IMPORTANT

: Do not mount on a flexible material.

BRAIDED HOSE INSTALLATION



Connect the stainless steel braided hose of your

compressor to the tank’s inlet port.

PORT LOCATIONS AND THREAD SIZE (NPT)

MAINTENANCE



Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed.



Make sure mounting screws are regularly tightened if needed.



Drain weekly, to avoid excessive buildup of condensation.

Summary of Contents for VXT4000P

Page 1: ...ecommend always to install a drain and safety valves in the tank Always depressurize the tank before servicing or adding accessories Do not use this tank as a breathing device Be sure to pump nothing...

Page 2: ...k as a template and then drill to size Using mounting hardware provided secure the air tank IMPORTANT Do not mount on a flexible material BRAIDED HOSE INSTALLATION Connect the stainless steel braided...

Page 3: ...air and check valves and replace if damaged or leaking Solution 3 Use soap and water solution on air connections and tank and tighten connections or repair leaks where needed Issue Excessive moisture...