A DC12V can be used with this instrument. When connecting a power
cord, make sure that the polarity of the power cord is correct.
Ⓝ
CCD Camera Connector
This is to input signals of a CCD video camera.
Ⓞ
Monitor Connector
This is for output of signals to a monitor.
HOW TO USE AGA-1
AGA-1 detects deviation of the guide star imaged through the CCD
video camera installed on a guide scope, and it automatically
corrects tracking errors in astrophotography. Center the guide
star on the screen of your monitor and bring it into focus before you
operate the AGA-1.
There are four modes of operation in the AGA-1.
(1) The
Level Check
mode will let you know if a star you selected
is bright enough to use as a guide star. It also works as a
re-set key for the whole system.
